Direkt zum Inhalt

Wiederherstellen einer fehlenden Skriptoption in der Outlook-Regel ausführen

In bestimmten Versionen von Outlook, insbesondere in aktuellen Updates, ist die Option „Skript ausführen“ aus Sicherheitsgründen möglicherweise standardmäßig deaktiviert. Um die Option „Skript ausführen“ in Outlook zu aktivieren und damit die Erstellung von Regeln mit VBA-Skripten zu ermöglichen, müssen Sie normalerweise bestimmte Registrierungseinstellungen ändern. Lesen Sie weiter, um detaillierte Anweisungen dazu zu erhalten.


Aktivieren Sie die fehlende Option „Skript ausführen“ in Outlook

Um die fehlenden wiederherzustellen Führen Sie ein Skript aus Option im Outlook-Regelassistenten, Stellen Sie zunächst sicher, dass Outlook geschlossen ist, und fahren Sie dann mit den folgenden Schritten fort:

  1. Drücken Sie auf Win + R Tasten zusammen, um das zu öffnen Führen Sie Dialogbox. Geben Sie in diesem Dialogfeld Folgendes ein: regedit und klicken Sie dann auf die OK .
  2. Im Herausspringen User Account Control Klicken Sie im Dialogfeld auf Ja .
  3. Im Registrierungs-Editor Navigieren Sie im Fenster zum folgenden Pfad, um darauf zuzugreifen Sicherheit Rahmen: HKEY_CURRENT_USER \ Software \ Microsoft \ Office \ 16.0 \ Outlook \ Sicherheit
  4. Rechtsklick auf die Sicherheit Taste und wählen Sie Neu > DWORD (32-bit) Value.
  5. Benennen Sie das erstellte DWORD als EnableUnsafeClientMailRules.
  6. Doppelklick auf den EnableUnsafeClientMailRules DWORD zum Öffnen des Bearbeiten Sie DWORD (32-Bit) Wert Dialogbox. Typ 1 der Wert auf Box, und klicken Sie auf OK.
  7. Starten Sie Ihr Microsoft Outlook neu.

Wenn Sie die oben beschriebenen Schritte befolgen, können Sie beim Erstellen von Regeln in Outlook die Option „Skript ausführen“ finden und verwenden.


Ähnliche Artikel


Beste Office-Produktivitätstools

Kutools for Outlook - Über 100 leistungsstarke Funktionen zur Optimierung Ihres Outlooks

🤖 KI-Mail-Assistent: Sofortige Profi-E-Mails mit KI-Magie – geniale Antworten mit einem Klick, perfekter Ton, mehrsprachige Beherrschung. Verwandeln Sie den E-Mail-Versand mühelos! ...

📧 E-Mail Automation: Abwesenheit (verfügbar für POP und IMAP)  /  Planen Sie das Senden von E-Mails  /  Automatisches CC/BCC nach Regeln beim E-Mail-Versand  /  Automatische Weiterleitung (erweiterte Regeln)   /  Begrüßung automatisch hinzufügen   /  Teilen Sie E-Mails mit mehreren Empfängern automatisch in einzelne Nachrichten auf ...

📨 E-Mail-Management: E-Mails einfach abrufen  /  Blockieren Sie betrügerische E-Mails nach Betreff und anderen  /  Doppelte E-Mails löschen  /  Erweiterte Suche  /  Ordner konsolidieren ...

📁 Anhänge ProBatch speichern  /  Stapeltrennung  /  Stapelkomprimierung  /  Automatisches Speichern   /  Automatische Trennung  /  Automatische Komprimierung ...

???? Schnittstellenmagie: 😊Mehr hübsche und coole Emojis   /  Steigern Sie Ihre Outlook-Produktivität mit Registerkartenansichten  /  Ausblick minimieren statt schließen ...

👍 Wunder mit einem Klick: Allen mit eingehenden Anhängen antworten  /   Anti-Phishing-E-Mails  /  🕘Zeitzone des Absenders anzeigen ...

👩🏼‍🤝‍👩🏻 Kontakte und Kalender: Fügen Sie Kontakte aus ausgewählten E-Mails im Stapel hinzu  /  Teilen Sie eine Kontaktgruppe in einzelne Gruppen auf  /  Geburtstagserinnerungen entfernen ...

Auf über 100 Eigenschaften Warten Sie auf Ihre Erkundung! Klicken Sie hier, um mehr zu erfahren.

 

 

Comments (26)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
You switched from 32 bit to 64 bit without explanation. See "New > DWORD (32-BIT Value)" then after "6. In the Edit QWORD (64-BIT)". Which is it ? Or is it both?
This comment was minimized by the moderator on the site
Sorry for the confusion. It should be the DWORD (32-bit) Value. And I've fixed it in the tutorial. 🙂
This comment was minimized by the moderator on the site
You change from DWORD to QWORD at the end.
It should be DWORD
This comment was minimized by the moderator on the site
Thank you for bringing this to my attention. I've made the necessary correction in the tutorial.
This comment was minimized by the moderator on the site
Great! Thanks
This comment was minimized by the moderator on the site
This worked for me in Outlook for Office 365. Once point to clarify, the instructions flip-flop between DWORD and QWORD, which are mutually exclusive. I used DWORD and it worked.
This comment was minimized by the moderator on the site
I also didn't have a security folder. To get around the issue, I set a rule to forward all emails fitting a specific rule to IFTTT so I can use their automation instead. Won't work for everybody, and attachments get a long number added to them if saving to Dropbox.
This comment was minimized by the moderator on the site
what applet did you use on IFTTT, or did you make your own?
This comment was minimized by the moderator on the site
I set an email trigger, and set the action to be to save to Dropbox. However, I've since switched to Microsoft Flow for saving Gmail directly to Dropbox. My specific goal was to save Gmail attachments to Dropbox, and Flow worked best for that after IFTTT dropped support for reading emails from Gmail.
This comment was minimized by the moderator on the site
I Don't Have a security folder after HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook
This comment was minimized by the moderator on the site
It's because Microsoft has yet again changed something concerning this feature. Most likely, this registry key path has completely changed, or has been outright omitted. I have a Premier Support ticket open with MS currently to have them provide us the CORRECT registry setting for Office2016/2019 current monthly channel to bring the Run a Script in Rules Actions back. It is completely unacceptable for MS to continue to alter/omit features like this without clear & priority notification to clients. I understand the security risks behind using such a feature, but in certain scenarios, this still is used.
This comment was minimized by the moderator on the site
By playing around I found the correct key:
Computer\HKEY_USERS\{whichevertheuserkeyis}\Software\Microsoft\Office\16.0\Outlook\Security

So do not use HKEY_Current_User, instead use HKEY_USERS
This comment was minimized by the moderator on the site
This doesn't seem to work for Outlook 2013. Is there a method that will work for this version? Also, your instructions reference DWORD and the images imply QWORD.
This comment was minimized by the moderator on the site
For 2013 I used HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Security and DWORD EnableUnsafeClientMailRules with value 1.
Each version of office has its own folder in "HKEY_CURRENT_USER\Software\Microsoft\Office\"

You also need to allow the macro to run in outlook 2013:

File -> Options -> Trust Centre -> Trust centre settings
-> Macro settings -> "Notifications for all macros"

This will ask you to allow the macro the first time the rule runs, but be careful not to allow any other unknown macros during day to day use. You could also use a digitally signed macro, and only allow digitally signed ones to run.

Then create your script, create a rule that runs it, and you should be set.
This comment was minimized by the moderator on the site
Did not work for me.  I have Outlook 2013, but maybe now that Office 365 has overstepped this setting somehow.  I have the trust settings enabled to notify for all Macros.
This comment was minimized by the moderator on the site
DWORD or QWORD? A bit confusing to understand which to use... Had to create DWORD to make it work. Thanks
This comment was minimized by the moderator on the site
Do You have instructions how to enable this option also for outlook 2010?
This comment was minimized by the moderator on the site
Thank You! It worked for me and as mentioned in one of the comments below, Step 6 was DWORD dialogue box for me.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations